Home / SVC Marine
SVC Marine
Engine filters, gaskets and spares at Son Duong
SVC supplies engine filters, gaskets, seals and machinery spares at Son Duong. Our team works with the chief engineer’s equipment references and practical fitting requirements to deliver the right components, with onboard fitting and repair available alongside the stores supply.
Our engine-room stores supply also covers electric motor bearings, seals and associated replacement parts. SVC identifies the motor and requested component before purchasing, and separates spare-parts delivery from dismantling, rewinding and refitting.
01
Identify the assembly and the component
Our team identifies the assembly and the component needed by the engine room. A filter housing is different from its element; a valve assembly is different from its service kit. Explain which part the vessel retains and which part must be replaced.
A nameplate photograph and the relevant drawing can resolve an incomplete description. Retain any suffix or revision that changes the component. If the vessel’s reference is unreadable, record that gap and send the dimensions or connection information needed for identification rather than treating a catalogue resemblance as a confirmed match.
02
Specify the dimensions that determine fit
We check the dimensions, sealing surfaces and connection details that determine fit. For gaskets, send the mating connection, dimensions and specified material or service requirement. For hoses and fittings, show both ends, connection type and the measurements that determine whether they will mate with the retained equipment.
SVC quotes the proposed component against those inputs. A requested equivalent needs a clear description and the engineer’s acceptance. Matching one visible dimension does not settle the material, service rating or connection details of the full part.
03
Motor bearings and machinery spares at Son Duong
SVC supplies motor bearings and machinery spares for vessels at Son Duong, Ha Tinh. Our team uses the full motor type, serial reference and available parts drawing to identify the component. A purchase for a loose bearing, a seal set and a complete motor needs different order lines, even when each relates to the same failed auxiliary.
Identify the drive-end and non-drive-end bearings separately, retaining the complete bearing designation and suffix where shown. Send readable photographs of the motor plate and bearing markings, together with the maker's parts reference. One bearing description should not silently become a pair, or a bearing kit that also includes seals and fittings.
For a proposed replacement motor, we compare the specified power, voltage, frequency, phases and speed with the mounting and shaft arrangement. Send the mounting drawing or measurable flange, foot and shaft details as well as the nameplate. Matching rated power alone does not establish a replacement that will fit the retained equipment.
SVC lists the proposed parts, contents of each kit and number of pieces against the accepted requisition. Any alternative is identified before purchase so the chief engineer can review the actual difference. Packages retain the equipment reference and bearing position for onboard receipt; fitting labour and checks remain separate from the supply quantity.
When the requirement needs dismantling or winding work, our Son Duong motor repair and rewinding service covers the repair worklist. This stores page keeps the component purchase and delivery clear, while the repair team defines removal, workshop work and refitting.
04
Separate supply from removal and installation
SVC supplies the parts and carries out fitting work as distinct, clearly described tasks. Removal, isolation, fabrication, fitting and operating checks need identifiable worklist lines. The stores purchase should not conceal a repair task that cannot be completed within the receiving window.
For a component that needs inspection before final identification, request that attendance explicitly. SVC can then quote the inspection and the later proposed spare as separate stages, with the findings defining what must be ordered. State the vessel’s sailing deadline and the machinery’s availability for access.
05
Receive spares by their equipment reference
We pack spares against their equipment references so the chief engineer can allocate them correctly. Distinguish loose seals or fittings from a complete kit, and retain the agreed documentation with the relevant line. The receiver should be able to allocate a package to the intended engine or auxiliary without reconstructing the enquiry.
Any mismatch found on receipt should remain an identified exception. Do not fit an unaccepted alternative merely to close the delivery record. Send the corrected reference or measurement so the outstanding supply can be quoted accurately for the next available window.
06
Related services and work records
Explore our related technical work and services and the wider service scope. Find the other supply and repair services for your port call in the North Central service directory.
08
Questions about Engine filters, gaskets and spares at Son Duong
Can a photograph replace the part number?
It helps identify the component but may not establish all dimensions, material or ratings. Send the maker, model, drawings and measurable connection details available to the vessel.
Can the stores quote include fitting?
Yes, if requested as a separate defined task. Identify access, isolation, installation interfaces and the checks needed so parts supply and onboard labour are both clear.
Is rated power enough to order a replacement motor?
No. SVC checks the motor identification, electrical ratings, speed and installation interfaces. Send the nameplate and mounting or shaft details so the proposed replacement can be reviewed against the retained machinery.
Does a motor bearing kit include both ends?
The supply list states this explicitly. Identify each bearing position, the parts included in a kit and the number of kits or loose pieces required. SVC separates the supplied components from any quoted removal, fitting and operating checks.
09
Request a Son Duong service quotation
Email the SVC supply desk with the item list, maker/model or part reference, dimensions, kit contents, quantity and receiving window. Include the actual Son Duong berth or nominated position and the latest vessel schedule. SVC returns the proposed scope and outstanding confirmations for acceptance.
Talk to SVC Marine
Please provide your company details and the vessel requirement or work scope. Acceptance is subject to verification and confirmation by SVC Marine.

